# Happy New Year with the Science of Champagne!

Have you ever though about how far you can shoot a champagne cork? The swedish physicist Hans-Uno Bengtsson has actually done the necessary calculations in the wonderful Swedish book “Kring flaskor och fysik” (which translates to something like “Among bottles and physics”, it was written together with sommelier Mischa Billing). Assuming a bottle pressure of 6 atmospheres, a cork length of 25 mm (the part in contact with the bottle), a radius of 9 mm and a mass of 7.5 g, this gives an initial cork velocity of approximately 20 meters per second or 70 km/h! This translates into a maximum shot length of around 40 m (if we neglect air resistance). In case you prefer not to shoot the cork, you could of coarse turn to a saber or a heavy kitchen knife instead to open the bottle.

When opening a bottle of champagne, you might have noticed the cloud forming right above the bottle neck (see picture below). This is due to a significant temperature drop, caused by gas expansion when we open the bottle. Assuming an adiabatic expansion (meaning no heat exchange with the surroundings), Hans-Uno Bengtsson has calculated a temperature drop of 112 °C! No wonder the vapor around the bottle neck immediately freezes forming a small cloud.

(picture by polarunner at flickr.com)

If this doesn’t satisfy your craving for champagne science, there’s a whole book on the subject: “Uncorked – The Science of Champagne” by Gérard Liger-Belair. He’s an associate professor of physical sciences at the University of Reims Champagne-Ardenne and probably knows more about champagne bubbles than anyone else! In addition to many fascinating pictures of bubbles, the book has many interesting facts. Did you know that:

• 0.1 liters of champagne (the contets of an average flute) contains approximately 0.7 liters of carbon dioxide which must escape to restore equillibrium – assuming an average bubble size of 500 micrometers in diameter this corresponds to 11 million bubbles!
• Contrary to popular belief, nucleation sites for bubbles are not found on scratches or irregularities on the glass itself, but on impurites stuck on the glass wall. These impurities are typically fibres from paper or fabrics.
• From the point when a bubble leaves the nucleation site till it reaches the surface, the volume increases by a factor of 1 million. This is due to diffusion of carbon dioxide from the solution and into the bubble.
• Surfactant molecules in champagne form a protective shield around the rising bubbles. This stiffens the bubbles and significantly increases the drag on the bubble as it rises (which gives us more time to admire the trail of bubbles!).
• The surfactant coating of the bubbles helps keeping them in line as they rise. In pure water, the bubbles would jostle around.
• The bursting bubbles play an imporant role in flavor release as they collect and concentrate surface active molecules which are thrown against your nose once the bubble bursts, creating a cloud of droplets.
• (these facts should be perfect conversation starters!)

(photo by Gérard Liger-Belair)

An interesting article by Gérard Liger-Belair, “Effervescence in a glass of champagne: A bubble story” is available from Europhysics news.

Happy New Year!